Ultrasonic Cleaners for Firearms & Large Tools Thermostatically Adjustable Heater
Keeping your firearms and tools clean is important to ensure the best performance and to extend the life of them. Ultrasonic cleaning is a gentle and effective solution to keep your firearms, larger engine parts and tools at their best. Here are the top ultrasonic cleaning units for these applications.
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) |
| TB-50 | 150x135x100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| TB-100 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 |
| TB-150A | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 |
| TB-150B | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 |
| TB-200 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 |
| TB-300 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 |
| TB-400 | 500x300x150 | 530x325x285 | 22 | 400 | 480 | 600 |
| TB-500 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600 |
Ultrasonic cleaner for Superior Parts Cleaning
1. Sweep frequency: Continuous slight variation of ultrasonic frequency to eliminate hot spots, dead zones, and standing waves.
Benefit: Provides uniform and thorough cleaning. Prevents damage to electronic components.
2. Heater: Thermostatically adjustable heater.
Benefit: Improves cleaning effectiveness; required for removal of grease and oil.
3. Normal mode: Operates at fixed ultrasonic frequency.
Benefit: Aids in mixing, dissolving, and dispersing samples.
4. Digital display: Displays operating parameters.
Benefit: Enables quick and easy monitoring of process status and resetting of precise operating conditions.
Ultrasonic washing machines with the basic essentials
TB-150B-6.5L ultrasonic washing machines are simple to operate yet give outstanding results. Simply:
- Fill the stainless steel tank with 6 liters (1.6 gallons) of aqueous ultrasonic cleaning solution formulated for the parts being cleaned. Turn on the unit and the heater, allowing it to operate without a load for approximately 5 minutes. This degasses new solutions, an important step for effective ultrasonic cleaning action.
- Place parts to be cleaned in the furnished mesh parts basket, immerse in the cleaning solution and set the digital timer for 20 minutes. (You will soon learn how much time is required based on what is being cleaned.)
- At the conclusion of the cycle remove the basket, inspect the parts, rinse and lubricate if necessary then reassemble.
A good practice is to skim off grease that floats to the surface, and to replace the solution when it becomes dirty and cleaning time extends. Dispose of both according to local regulations, then clean the tank following the manufacturer’s recommendations before refilling with a fresh solution.
Other reasons to buy TB-150B-6.5L ultrasonic washing machines
- Stainless steel tanks
- Easily cleaned cabinets with carrying handles
- Shipped with lid, basket and operating instructions
- Standard 100 – 120 volt/220-240 volt AC power requirement
- 12 x 6 x 6-inch deep tank
Product Tags:
|
|
Thermostatically Adjustable Heater Industrial Ultrasonic Cleaner for Firearms & Large Tools Images
|
